Design Of Front Empty Female Shallow Sandals

The front end of the women's shallow sandals is an air permeable structure, commonly known as "fish mouth" shoes.

Because the permeability of the front empty structure is good, the toes are not exposed, which are very popular among mature women.

The design of the last shoe used by the empty female Asaguchi Ryo is usually round head or small round last, and the allowance should not be too large, otherwise it will appear "shovel soil" when wearing.

Because the position of the front space is placed in the shoe last position, it will not affect the foot holding ability of the front air sandals.

The common fish mouth shapes are circular and sharp, and the depth of the fish mouth is generally not more than the toe end point.

There is a difference between the inside and outside arms in the mouth of the fish mouth, and the mouth is longer than 3mm outside.

The rest is designed with women's round shoes.

As shown in Fig. 4-1-1, there is an arc shaped opening on the tip of the toe of the female shallow sandal, and the mouth of the fish mouth moves forward 2 to 3mm.

 

The purpose of this treatment is to coordinate with the big toe position of the foot.

Design of 2. pointed fish mouth shoes

As shown in Fig. 4-1-2, the front air structure is sharp, and the opening depth is not more than the end point of the toes. The mouth of the fish mouth is also moved 2 to 3mm.

 

The depth of the fish mouth should not be too deep, otherwise it will lose the taste of women's shallow shoes.

The shape of the fish mouth is rarely designed in a straight line. It is designed to be straight and open, and the toes are easily exposed.

If the fish mouth with a larger opening is designed, the front and rear sandals are usually designed.

3. design of front empty ladies sandals with asymmetric structure

As shown in figure 4-1-3, the upper is asymmetrical, and the two parts intersect to form the fish mouth.

The design is designed according to the asymmetric structure of women's shallow shoes. Use the tile map to grab the bottom mouth of the fish mouth for 2 ~ 3mm.

Other design requirements are for women's round shoes.

 

For sandals, the appearance of the exposed parts will expose the inner bottom edges, so it is necessary to wrap the inner bottom with the wrap.

About the design of the inner parts of sandals.

It has been introduced in the book "foot type, last type / bottom part", and will not be repeated.

But the location and markings of the package should also be expressed when designing parts.

As shown in figure 4-1-4, the two diagonal line is the position mark when the foot is stretched. The inner bottom usually needs to polish the groove, and the grinding position is on the help foot, and do not exceed the marking line.

The dotted line in the picture is wrapped in a range, exceeding the marking line 10~15mm and hiding the stubble under the feet.

 

When the marking line is fixed, the sample can be made into paper covers, and then folded on the shoe last to help the feet, marking the direction and length of the help feet.